Ravi Scientific Industries

NOTE :
For customer outside India, order less than USD 5000
not entertained.

(Plastic Labware)

Polylab Beakers, moulded in Polypropylene, have execellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solutions becomes very convenient because of its tapered spout.
Material : Polypropylene

Material : Polypropylene

This Burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTEE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute minerals acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is deal and can be used upto 5% wt/wt of acids or 30% bases.
Material :Polymethyl Methacrylate/ TPX

Polylab presents a fast relese pipetting device for precise pipetting & zip-quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipette of standard sizes. It resists acids & alkalies and can be easily disassembled for through cleaning.
Material :Acrylonitrile Butadiene Styrene

Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense small uniform drops of liquids when pressed lightly.
Material :Low Density Polyethylene

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.
Material :Low Density Polyethylene & Polypropylene

These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.
Material :Low Density Polyethylene & Polypropylene

This autoclavable bottle, made of polypropylene, can be used for storing & transfering chemicals and other reagents safe & sound.
Material :Polyproplyne

This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The buil in depressions on two sides provide excellent grip while holding this bottle.
Material :Polyproplyne

This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vaccum.
Material :Polyproplyne

Polylab Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable Carboys are provided with wide handles making it convenient while carrying or pouring purposes.
Material :Polyproplyne

Adding in line of Polylab Aspirators, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to teh body. These carboys. These carboys are in excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.
Material :Polyproplyne

Polylab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.
Material :Polypropylene

Polylab Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by sueezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.
Material :Low Density Polyethylene

These Bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable. The distinguishing feature that these bottles contains is the builtin delivery tube making it a one-piece Wash-Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.
Material :Low Density Polyethylene